Products / Rs 485 Communication Clock

Rs 485 Communication Clock

Dynatek supply RS485 Communication Clock which is an improvement over RS-422 which increases the number of devices from 10 to 32 and defines the electrical characteristics necessary to ensure adequate signal voltages under maximum load.

Master / Slave type 1

In this system, Dynatek provides master & slave clocks which gives RS-485 communication facility. A simple two-wire twisted pair cable is required to connect the Master & Slave Clock together to form the synchronized network system. Mater clock communicates Time data at a fixed interval of 15 minutes.

Master / Slave type 2

In this system, all Slave clocks are connected to your computer via RS-232 to RS-485 converter to form a synchronized network. The computer acts as a master & controls all slave clocks by transferring time data at set intervals.

Master Computer will be provided with GPS receiver ( optional ) to synchronize with GPS TIME.

Rs 485 Communication Clock
Sizes for Clock 2.3 inch ( 315 X 115 X 60 mm )
4 inch ( 480 X 185 X 65 mm )
6 inch ( 575 X 250 X 80 mm )
8 inch ( 750 X 320 X 80 mm )
10 inch ( 950 X 400 X90 mm )
Model NET : NETWORK CLOCK
RS : RS 485 BUS
SP : SYNC PULSE ( 3 WIRE)
Mounting Type W = WALL
SW = SIDE WALL
R = ROOF
Display Type SG = 7 SEGMENT
LE = LED TYPE
SS = SINGLE SIDE / BB = BACK TO BACK